How to restore the operating system on Galaxy S10 Plus

Who I am
Aina Martin
@ainamartin

How to restore the operating system on Galaxy S10 Plus. Do you have a Samsung Galaxy S10 Plus and want to install the Stock ROM, the official firmware? Ok then you are in the right place. Samsung Galaxy S10 Plus is one of the most popular smartphones of 2019. The new Samsung Galaxy S10 Plus has attracted the attention of many Android fans.


The developers have also tried and made a lot of custom ROMs for this device. However, after getting the taste of custom ROMs, many of us feel the need to go back to stock firmware.



In case you have problems with your device related to battery, performance, camera, connection, etc. you can easily install official firmware to solve all your problems. Generally, installing Stock firmware on your Samsung Galaxy S10 Plus will eliminate any software glitches you may have with your device.

So here is the guide on how to restore the operating system on Galaxy S10 Plus and the link to download the firmware.


How to restore the operating system on Galaxy S10 Plus

Android is one of the most customizable software, and is the only reason most people buy Android devices. Due to this customization, many people often lock their devices and have to install stock firmware on Galaxy S10 Plus.

If you find yourself in such a situation, this guide will help you to install firmware on Samsung Galaxy S10 Plus.

Prerequisites:

  • This guide only works with Samsung Galaxy S10 Plus
  • Download and install Samsung Smart Switch
  • You should have Samsung USB Drivers and install them on your PC.
  • Make sure you have ODIN installed on your PC, version 3.13.1
  • Charge the device battery up to 50%
  • Make a full backup of your Galaxy S10 Plus data

Download the firmware for your Galaxy S10 Plus model

  • Download the Galaxy S10 Plus firmware

How to restore the operating system on Galaxy S10 Plus

  1. Download and install Odin on your PC.
  2. Then enable the debug USB. To enable USB debugging you need to activate the developer option. Now go to Settings -> About phone -> Now tap on the build number 7-8 times until the message “Developer options enabled". Once the opzioni sviluppatore, back at settings -> Open  opzioni sviluppatore Enable USB Debugging.
  3. Open ODIN. Right-click and open it with Run as Administrator.
  4. Now restart your phone in download mode. To access the Download mode, starting from the phone off, press the BIXBY button at the same time, then the VOLUME DOWN button and finally the POWER button until the screen turns on.
  5. Now connect your phone to the PC using the USB cable.
  6. When you connect the USB cable you will see a blue mark in Odin
  7. Now in Odin add the downloaded firmware from above by clicking the AP / PDA button.
  8. Now make sure the partition is NOT checked - Go to Option and see (Let Auto Reboot and F-Reset are checked)
  9. Click the Start button, relax and wait a few minutes until a message appears.
  10. When you see PASS, you can remove your phone.

Don't panic if you see your phone rebooting during the update.




add a comment of How to restore the operating system on Galaxy S10 Plus
Comment sent successfully! We will review it in the next few hours.